Sioux-tools SERIES 90° User Manual download pdf

Form ZCE468A

Date 2003June20/D

Page 1 of 12

Printed In U.S.A.

INSTRUCTIONS & PARTS LIST FOR NO. 2 1/2 SERIES 45° & 90° ANGLE DRILLS

Read and understand "Safety Instructions For Air Tools" and these instructions before

operating this tool.

AIR SUPPLY

The efficiency of the tool is dependent on the proper supply of clean dry air at 90 psig (6.2 bar). The use of a line filter,

pressure regulator, and lubricator will insure maximum output and life of tools.

HOSE AND HOSE CONNECTIONS

Supply hose should be not less than 3/8" (10 mm) I.D. Extension hoses should be at least 1/2" (13 mm) I.D. Use couplings

and fittings with at least 3/8" (10 mm) I.D.

LUBRICATION

Use SIOUX 288 air motor oil. An airline lubricator, set to deliver 2 to 4 drops per minute, is recommended. If a lubricator is

not used, add .04 oz. (1.2 cc)(12 to 15 drops) of SIOUX No. 288 air motor oil into the air inlet daily.

Lubricate the planetary gear assemblies with 1/4 oz (7 gm) of SIOUX No. 298A grease after every 100 hours of operation.

Lubricate the angle head with 0.01 oz (0.3 gm) of SIOUX 1198 grease after every 8 hours of operation.

GENERAL OPERATION

Start the tool by depressing the lever. Motor speed can be adjusted with the slotted screw at the rear of the housing oppo-

site the lever.

Tools left connected to the air supply while making adjustments, changing accessories, or doing any

maintenance or service on tool can start unexpectedly.

Always remove tool from air supply and activate trigger to bleed air line before making any adjust-

ments, changing accessories, or doing any maintenance or service on tool.

Tools starting unexpectedly can cause injury.

Catalog No. Sound Pressure dBA Sound Power dBA Vibration m/s

2A1110 82.1 94.8 Less than 2.5

2A1310 82.1 94.8 Less than 2.5

2A1410 82.1 94.8 Less than 2.5

2A1510 82.1 94.8 Less than 2.5

2A1610 82.1 94.8 Less than 2.5

2AY1310 82.1 94.8 Less than 2.5

2AY1400 82.1 94.8 Less than 2.5

2AY1410 82.1 94.8 Less than 2.5

2AY1510 82.1 94.8 Less than 2.5

2AY1610 82.1 94.8 Less than 2.5

*prt PN8NTC1 *prt PN8NTC1 *per ISO8662

SOUND AND VIBRATION READINGS

DECLARATION OF CONFORMITY

We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products

2A1110, 2A1310, 2A1410, 2A1510, 2A1610, 2AY1310, 2AY1400, 2AY1410,

2AY1510, 2AY1610 including 45, AH suffixes

to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:

EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1

following the provisions of

89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.

June 1, 2003

Murphy, North Carolina, USA

Date and place of issues

Gerald E. Seebeck

President

Sioux Tools Inc.

Name and position of issuer

Signature of issuer

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1

1Form ZCE468ADate 2003June20/DPage 1 of 12Printed In U.S.A.INSTRUCTIONS & PARTS LIST FOR NO. 2 1/2 SERIES 45° & 90° ANGLE DRILLSRead and unde

Page 2

10PARTS LIST FOR 90° ANGLE HEAD ASSEMBLYFig. PartNo. No. DescriptionFig. PartNo. No. Description*Order Quantity As RequiredFURNISH CATALOG, SERIAL, A

Page 3 - ANGULO EN 45° Y 90°

11PARTS LIST FOR 45° ANGLE HEAD ASSEMBLY1. 65238 Bushing—Flange2. 65246 Pin (2)*(Set of 22)3. 65236 Gear—Collet (1/4–28 Th’d)65264 Gear—Collet (#10–32

Page 4

12Printed In U.S.A.Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallendeStaub enthält Chemikalien, die nac

Page 5 - DE 45° & 90°, SERIE 2 1/2

2ANWEISUNGEN & TEILELISTE FÜR 45° & 90° WINKELBOHRER DER SERIE NR. 2 1/2Vor dem Betrieb dieses Werkzeugs lesen Sie bitte diese Anweisungen und

Page 6

3INSTRUCCIONES Y LISTA DE PARTE PARA LA SERIE N° 2 1/2 DE TALADROS ENANGULO EN 45° Y 90°Lea y entienda las "Instrucciones de seguridad para herr

Page 7

4ISTRUZIONI E LISTINO PARTI PER I TRAPANI AD ANGOLO DA 45° & 90° SERIE N. 2 1/2Leggere attentamente le “Istruzioni per l’uso sicuro di apparecchi

Page 8

5INSTRUCTIONS ET LISTE DES PIECES DETACHEES POUR LES PERCEUSES A ANGLEDE 45° & 90°, SERIE 2 1/2Lisez avec attention les “Instructions de mise en g

Page 9

6INSTRUCTIES EN ONDERDELENLIJST VOOR 45° & 90° HOEKBOREN SERIE NO. 2 1/2Voordat u met de machine aan de slag gaat, moet u deze instructies en de“V

Page 10

7ANVISNINGAR OCH RESERVDELSLISTA FÖR VINKELBORRAR NR 2 ½ SERIES 90°OCH 45°Läs och sätt dig in “Säkerhetsföreskrifter för tryckluftsverktyg” samt dessa

Page 11

Page 12 - Printed In U.S.A

9Fig. Part NameNo. No.Fig- Part Nameno. No.1. 63355 Ass’y—Hose Exhaust2. 1317 Hose—Leader3. 54837 Intake Adaptor—1/4" NPT54837Y Intake Adaptor—1/