Sioux-tools 1407B User Manual download pdf

Form ZCE428C

Date 2004November15/K

Page 1 of 10

Printed In U.S.A.

INSTRUCTIONS AND PARTS LIST FOR 1407 & 1407B AIR DRILL

SERIAL “C”

Read and understand "Safety Instructions For Air Tools" and these instructions before

operating this tool.

AIR SUPPLY

The efficiency of the tool is dependent on the proper supply of clean dry air at 90 psig (6.2 bar). The use of a line filter, pressure regulator, and

lubricator will insure maximum output and service life of tools.

HOSE AND HOSE CONNECTIONS

Supply hose should be not less than 5/16" (7.9mm) I.D. Extension hoses should be at least 3/8" (10mm) I.D. Use couplings and fittings with at

least 5/16" (7.9mm) I.D.

LUBRICATION

An airline lubricator, set to deliver one drop per minute, is recommended. If a lubricator is not used, add .04oz. (1.2cc) of SIOUX No. 288 air motor

oil into the air inlet daily.

Lubricate the gearing with SIOUX No. 1232A grease after every 50 hours of operation.

GENERAL OPERATION

This tool is equipped with a teasing throttle. By slightly depressing the trigger the chuck will rotate slowly. This is useful for starting a drill bit

without first spotting with a punch. Fully depressing the trigger for maximum speed.

A speed control adjusting screw is located on the trigger face and is adjusted with a 1/16” (1.6mm) hex key wrench.

SOUND AND VIBRATION READINGS

Sound Pressure Sound Power Vibration

Catalog No. dBA dBA m/s

1407, 1407B 72.5 83.5 Less than 2.5

*prt PN8NTC1 *prt PN8NTC1 *per ISO8662

Tools left connected to the air supply while making adjustments, changing accessories, or doing any mainte-

nance or service on tool can start unexpectedly.

Always remove tool from air supply and activate trigger to bleed air line before making any adjust-

ments, changing accessories, or doing any maintenance or service on tool.

Tools starting unexpectedly can cause injury.

DECLARATION OF CONFORMITY

We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products

1407, 1407B

to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:

EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1

following the provisions of

89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.

June 1, 2003

Murphy, North Carolina, USA

Date and place of issues

Gerald E. Seebeck

President

Sioux Tools Inc.

Name and position of issuer

Signature of issuer

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - SERIAL “C”

1Form ZCE428CDate 2004November15/KPage 1 of 10Printed In U.S.A.INSTRUCTIONS AND PARTS LIST FOR 1407 & 1407B AIR DRILLSERIAL “C”Read and understand

Page 2 - SERIE “C”

10Printed In U.S.A.Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallendeStaub enthält Chemikalien, die nac

Page 3 - 1407 & 1407B

2DRUCKLUFTZUFUHRDie Werkzeugleistung hängt von der ordnungsgemäßen Zufuhr von sauberer, trockener Luft mit einem Druck von 90 psig (6,2 bar) ab. DieVe

Page 4

3INSTRUCCIONES Y PIEZAS PARA PERFORADORAS NEUMATICAS1407 & 1407BSERIE “C”Lea y entienda las “Instrucciones de seguridad para herramientas neumátic

Page 5 - SÉRIE “C”

4ISTRUZIONI E LISTINO PART PER I TRAPANI PNEUMATICI MODELLO1407 & 1407BSERIE “C”Leggere attentamente le “Istruzioni per l’uso sicuro di apparecc

Page 6 - SERIENUMMER “C”

5INSTRUCTIONS ET LISTE DES PIECES DETACHEES POUR PERCEUSES PNEUMATIQUES1407 & 1407BSÉRIE “C”Lisez avec attention les “Instructions de mise en gar

Page 7

6INSTRUCTIES EN STUKLIJST VOOR 1407 & 1407B BETREFFENDE PNEUMATISCHEBORENSERIENUMMER “C”Voordat u met de machine aan de slag gaat, moet u deze ins

Page 8

7Ljudtryck Ljudeffekt VibrationKatalog nr. dBA dBA m/s21407, 1407B 72,5 83,5 Mindre än 2,5*prtPN8NTC1 *prtPN8NTC1 *enligt ISO8662LUFTTILLFÖRSELHur eff

Page 9 - 1407 & 1407B AIR DRILL

Page 10 - Printed In U.S.A

9PARTS LIST FOR1407 & 1407B AIR DRILLSERIAL “C”* Order Quantity As NeededFurnish Catalog, Serial, and Model Number When Ordering PartsFig. PartNo.