Sioux-tools 1456ES User Manual download pdf

*Sound Pressure *Sound Power *Vibration

Catalog No. dBA dBA m/s

1449ES 78.0 90.0 Less than 2.5

1450ES 78.0 90.0 Less than 2.5

1451ES 78.0 90.0 Less than 2.5

1452ES 78.0 90.0 Less than 2.5

1454ES 78.0 90.0 Less than 2.5

1455ES 78.0 90.0 Less than 2.5

1456ES 78.0 90.0 Less than 2.5

*per PN8NTC1 *per PN8NTC1 *per ISO 8662

INSTRUCTIONS AND PARTS LIST FOR 1449ES, 1450ES, 1451ES, 1452ES, 1454ES,

1455ES, 1456ES DRILLS

(SERIAL “C”)

Read and understand "Safety Instructions For Air Tools" and these instructions before

operating this tool.

AIR SUPPLY

The efficiency of the tool is dependent on the proper supply of clean dry air at 90 psig (6.2 bar). The use of a line filter,

pressure regulator, and lubricator will insure maximum output and life of tools. Before connecting tool, blow out the air line to

remove water and dirt which may have accumulated.

HOSE AND HOSE CONNECTIONS

Supply hose should be not less than 3/8" (10mm) I.D. Extension hoses should be at least 1/2" (13mm) I.D. Use couplings and

fittings with at least 3/8" (10mm) I.D.

LUBRICATION

Use SIOUX No. 288 air motor oil. An airline lubricator, set to deliver 2 to 4 drops per minute, is recommended. If a lubricator is

not used, add .04 oz. (1.2cc, 12 to 15 drops) of oil into the air inlet twice daily.

Lubricate the gearing every 100 hours of operation with SIOUX No. 289A grease.

GENERAL OPERATION

This tool is equipped with a teasing throttle. By slightly depressing the trigger the chuck will rotate slowly. This is useful for

starting a drill bit without first spotting with a punch. The tool will run at maximum speed when the trigger is fully depressed.

If the gear case is removed or loosened, re-tighten to 35 ft-Ib.

SOUND AND VIBRATION READINGS

Form ZCE476C

Date 2004January6/A

Page 1 of 10

Printed In U.S.A.

DECLARATION OF CONFORMITY

We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products

1449ES, 1450ES, 1451ES, 1452ES, 1454ES, 1455ES, 1456ES including B, LC, Y suffixes

to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:

EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1

following the provisions of

89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.

January 1, 2004

Murphy, North Carolina, USA

Date and place of issues

Gerald E. Seebeck

President

Sioux Tools Inc.

Name and position of issuer

Signature of issuer

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - (SERIAL “C”)

1*Sound Pressure *Sound Power *VibrationCatalog No. dBA dBA m/s21449ES 78.0 90.0 Less than 2.51450ES 78.0 90.0 Less than 2.51451ES 78.0 90.0 Less than

Page 2 - (SERIE “C”)

10Printed In U.S.A.Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallendeStaub enthält Chemikalien, die nac

Page 3

2*Schalldruck *Schallstärke *VibrationKatalog-Nr. dBA dBA m/s21449ES 78,0 90,0 Weniger als 2,51450ES 78,0 90,0 Weniger als 2,51451ES 78,0 90,0 Weniger

Page 4

3*Presión de *Presión de *VibraciónNo.Catálogo sonido dBA sonido dBA m/s21449ES 78,0 90,0 Menos de 2,51450ES 78,0 90,0 Menos de 2,51451ES 78,0 90,0 M

Page 5 - (NUMÉRO DE SÉRIE AVEC UN “C”)

4*Pressione *Potenza *VibrazioniCatalogo n. sonora dBA sonora dBA m/s21449ES 78,0 90,0 Inferiore a 2,51450ES 78,0 90,0 Inferiore a 2,51451ES 78,0 90,0

Page 6 - (SERIENUMMER “C”)

5Réf. *Pression *Puissance *Vibrationcatalogue acoustique dBA acoustique dBA m/s21449ES 78,0 90,0 2,5 maximum1450ES 78,0 90,0 2,5 maximum1451ES 78,0 9

Page 7 - (SERIE “C”)

6Catalogus- *Geluidsdruk *Geluidsver- *Trillingnummer: dBA mogen dBA m/s21449ES 78,0 90,0 Minder dan 2,51450ES 78,0 90,0 Minder dan 2,51451ES 78,0 90,

Page 8

7*Ljudtryck *Ljudeffekt *VibrationKatalognr. dBA sonido dBA m/s21449ES 78,0 90,0 Mindre än 2,51450ES 78,0 90,0 Mindre än 2,51451ES 78,0 90,0 Mindre än

Page 9

Page 10 - Printed In U.S.A

91. 2352 Ass’y—1/4" Hex Quick Change Adapter2. 21019A Chuck (0-1/4" Cap)(3/8” Thread)21133 Chuck (1/16"-3/8" Cap)(3/8” Thread)2113